In this guide, we have brought you the common errors associated with canon printers with their respective cause and solutions so that you can keep your canon printer errors and solutions.
The below-listed messages can be displayed on your printer screen on the part of printer error.
1. No paper/ink
2. Paper Jam
3. No image can be printed or cannot print!!
4. No image and
5. Hardware error.
We have listed the basic troubleshooting solutions to the above-mentioned errors with their respective possible causes.
If this error message is displayed on your printer screen while printing a document then the below reasons could be held responsible for this displayed message.
The simple troubleshooting solutions you can take at your end to get rid of this error are:
1. Try checking for your ink cartridges, If it needs to be refilled or replaced
2. If you have enough ink level filled in your cartridges then check for its setup, Your cartridges must be correctly installed
3. If the error is occurring due to the improper paper feeding through the printer then remove the cartridge and physically remove any leftover paper.
The most common cause behind this error is the incorrect placement of paper in the printer tray.
The simple yet effective troubleshooting solutions you can try at your end to get rid of this error are:
1. Press or hit the Back button to eject the paper from your device
2. If the paper is not ejected then try to reset your printer device
3. If both methods fail then try removing the cartridge physically and gently pulling out the stuck paper from the place.
This error occurs when:
The effective troubleshooting solutions you can try at your end to get rid of this issue are:
1. You must resize the excessively large image file, be sure that the image size corresponds to the camera's recording pixels
2. Try to limit the size of the image within the print range i.e. less than 8000*8000 pixels.
4 No Image!!!, Try Checking your Memory Card.
This error might occur as a result of issues with the memory card. the common responsible causes behind this error are:
1. The image to be printed is not readable for your printer device
2. The image folder name is not supported
3. Image is not recorded or stored in the memory card.
The simple yet effective troubleshooting solutions you can try at your end to get rid of this error are:
1. Try changing the name of your image folder, try removing double-byte characters
2. Check for your image f it is really stored on the memory card.
3. Try restarting your canon camera.
A technical glitch in your printer device can lead to the display of this message on your printer screen. The Below troubleshooting solutions can be implemented to get rid of this error.
1. Try Restarting your Printer.
2. Try the Factory Reset on your Canon Printer.
3. If Resetting and Restarting do not Help in Resolving your issue then try to Connect with the Technical team of the Canon Printer.
In this article, we have tried to cover the most common Canon printer errors that you can face and how you can fix Canon printer errors and get your printer running again. If none of the above suggestions hit you hard in resolving your Canon printer error then you can connect with the technical support team of Canon printers.
Copyright © 2024 Printer Tech Support | all right reserved.
DISCLAIMER : Printer Tech Support is an independent Technical Support Provider. We are not affiliated to any 3rd party brand unless specified. Call vendor for direct Support.
Top Searches in Canon