How to Fix Brother Printer Error Ink Absorber Full?

Users of Brother printers are familiar with a few of the common faults that appear. The faults include those pertaining to networks, malware, viruses, firmware, software, drives, system errors, and more.

Occasionally the fault is encoded in a code, and other times the printer displays a message indicating the problem on the LCD screen. We're going to talk about the LCD's ‘’ BROTHER PRINTER ERROR INK ABSORBER FULL’’ in this article. It indicates that a new ink absorber is required right now. By doing this, the error will stop blinking on the screen.

What Does an Error In the Ink Absorber Mean?

Often referred to as the "flushing box," it serves to collect ink following the printer head's purging. Every time the machine cleans or flushes, all of the ink is captured by it. The ink absorber's lifespan typically equates to the lifetime of the printer. However, sometimes excessive usage and machine-made flushes cause the absorber to get overwhelmed with bloats of ink.

The printer will recognize the urgency of the issue and will continue to display the alert on the LCD panel. It is required that users swap out the old ink absorber for a new one right away.

These Actions Will help you Fix the Issue.

• The printer will start a purge during the initial setup, which will fill the ink tubes where the ink cartridges are being installed.

• The printer will clear the paper jam before the subsequent print job. In this stage, the printer head will be automatically cleaned by the device. To safeguard the printer, this procedure is used to remove dust from the paper. The print head may sustain significant harm from the dust particles.

• If you remove the cartridges while the printer is unplugged, it will begin the print head cleaning process when it is connected back in.

• Use authentic Brother printer supplies to replace the ink absorber. It guarantees the printer's longevity and lessens the disruption frequently brought on by generic or off-brand components.

• To prevent ink flooding, perform a reset after inserting the new ink absorber. You will see ink drips coming from the printer's bottom if you reset the entire system before replacing the component.