Kodak Printer Not Printing Black Ink Issue - How to Fix It?

Kodak Printers while operating may face a whole host of technical snags ranging from faulty cartridges to a malfunctioned printhead to corrupt files of printer-specific drivers.

I encountered a Kodak Printer Not Printing Black issue which I was able to fix by getting a series of troubleshooting steps executed not just to ascertain the specific cause for the issue but also to find a fix for the same. So, here is a quick guide that can you always refer to for getting the Kodak Printer Not Printing Black issue resolved. 

Check the Calibration of Kodak Printer

The prime reason for the Kodak printer not printing black ink issue is the inappropriate calibration of your Kodak Printer. You can check the calibration by performing a self-diagnosis of your Kodak printer after inserting a new cartridge along with inspecting the alignment of the printer. This would probably help you fix the black ink issue.

Clean Cartridges of Kodak Printer

Your Kodak printer cartridge might have been stained which can be cleaned using a mop or brush. You should then be cleaning the scanner or laser points.

Subsequently, you must remove your Kodak printer cartridge and must fix it again after sweeping a piece of dry cotton on the cartridge. Now test the proper functioning of the cartridge by getting a page printed. 

Check Kodak Printer Cartridge Tape

You may have not removed the plastic strip from the cartridge while fixing the new cartridge into the slot inadvertently. This may have possibly caused your Kodak printer not to print appropriately.

To fix this up you must ensure that the plastic strip is removed from the ink spilling end. 

Updating Kodak Printer Driver

Your printer may not have been properly paired with the latest driver which may be causing Kodak Printer Not Printing Black. This happens also because of some files in the driver may be missing.

For this, you need to update this by going to the Control Panel and searching for the relevant drivers from the System and Security option under Printer category. Alternatively, you can also get the latest drivers for your Kodak printer from Kodak’s website.

Replacing the Damaged Components of Your Kodak Pinter

In a remote possibility, your Kodak printer may be damaged, the ultimate remedy for which is to replace the damaged Kodak printer. Even after following the above steps, if the Kodak printer not printing black ink issue is persisting then you must contact persons with technical expertise in dealing with printer-related problems.