How to Fix Error Code SC899 on Ricoh Printer?

Using Ricoh printers is perhaps one of the best printing options available but the Error Code SC899 on Ricoh printer may make you a little more astonished when you start observing the same frequently. This quick guide attempts to help you fix this issue by prescribing a few very easy and do-it-yourself tricks. 

The true reason behind this Ricoh SC899 Error

Ideally, when you use your Ricoh printer for long without updating its drivers the outdated drivers of your Ricoh printer might not be enough to address issues emanating due to technical glitches. This causes you to witness interruption in the form of Error Code SC899 on Ricoh printer.    

Fixing Ricoh Error Code SC899

Method 1 - Power cycling your Ricoh printing machine

Step 1 - Begin by deleting all pending printing jobs followed by switching off your Ricoh printer. 

Step 2 - Now unplug all the connecting  and patiently wait for at least 10 minutes.

Step 3 - After inserting all the cables back into the Ricoh printer and computer switch on the devices.

Step 4 - When your computer and Ricoh printer both have turned on try to secure a printout to check whether the Error Code SC899 on Ricoh issue is fixed.

Method 2 - Troubleshooting your Ricoh Printer in the following Way 

Step 1 - First remove the networking cable away from your Ricoh printer followed by entering into the “Service Mode”.

Step 2 - Continuing with the initiative to fix the Error Code SC899 on Ricoh printer press the keys in the prescribed order, First [Reset], followed by pressing [1], then [0], thereafter [7], and then finally the [delete] key. 

Step 3 - Now press and continue holding the [Clear] button till you see the “SP” menu.

Step 4 - Here you have to press the “SP System” button followed by clicking on the new menu that appears and then expand the segment that is labeled “SP-5XXX”.

Step 5 - At this moment scroll down the pages till the time you see and find the “5801 – Memory Clear” option. 

Step 6 - After the above step expand the section that is associated with the “5801 - Memory Clear” option. Now you just have to click the 8 submenus that bear the heading “Printer Applications”. Continue pressing the “Executive” button given on the right-hand side in a bid to erase the entire memory of the Ricoh printer.

Step 7 - Here you have to provide your confirmation by clicking on the “Run” button given in the pop-up message to continue with the ensuing steps. 

Step 8 - Now your Ricoh’s printer setup will trigger a request to close and complete the process. Finally, after carrying out the completion of the process try to execute a new printing job and find out whether the issue in the form of Error Code SC899 on the Ricoh printer stands resolved.   

Method 3 - Installing a New Version of Adobe Acrobat May also be a Permanent Fix 

It is commonly observed that when you are trying to print PDFs using plug-ins installed in applications such as Google or Microsoft Windows you might see the Ricoh SC899 issue surfacing. This can be addressed simply by installing the latest Adobe Acrobat after uninstalling its older version. You must also resort to updating the driver of your Ricoh printer along with